Deck Staining Services in Franklin, OH

Has your deck turned gray, rough, or slick with green mildew in the shady corners? JTH Painting & Subcontracting cleans, preps, and stains decks so the wood stays sound longer.

Contact us

Why Decks Wear Out Faster Than the Rest of Your House

Your siding stands upright and sheds rain. Your deck lies flat and holds it. That’s the main reason deck boards break down faster than almost anything else outside. Water sits on the surface, soaks into cut ends and nail holes, and freezes in winter, which opens small cracks a little wider each year. The sun then dries out the top layer and turns it gray. Backyard deck staining in Franklin, Ohio slows that cycle by filling the wood’s pores so water beads up instead of soaking in. For residential deck staining, it also helps to know who’s doing the work. We’re registered with the state as Ohio LLC No. 4352855, which you can check on the Secretary of State’s website.

Can New Stain Go Over the Old Stuff?

Sometimes, but not always, and guessing wrong is a common reason new stain peels. A semi-transparent stain that has mostly worn away can usually take a fresh coat after cleaning. A solid stain that’s flaking is different. New stain applied over loose film will flake right along with it, so the loose material has to come off first. Mixing products matters too, since some stains won’t bond well over a different type. Professional deck staining in Franklin, Ohio starts by testing what’s already on the wood. A good deck staining contractor should tell you which case your deck falls into before quoting, because the prep for each one takes very different amounts of time.

Our Services

Pick one service or combine several. Every deck starts with a test of the existing finish and a check for soft wood.

Deck Stripping

Peeling solid stain and failing film removed, so new stain bonds to bare, sound wood instead of loose coating.

Mildew Cleaning

Green and black growth in shady areas is treated so it doesn’t come back under the fresh finish.

Board Replacement

Soft or split boards swapped out before staining, so the whole surface stays solid underfoot.

Book Your Deck Visit

Call JTH Painting & Subcontracting at (937) 808-5145. We’ll test the old finish, look for soft boards and mildew, and give you a free quote that explains exactly what prep your deck needs before the stain goes on.

Shade, Mildew, and the Spots That Fail First

Every deck has trouble spots. Boards under trees or on the north side stay damp longer and grow green mildew. Stair treads and the area by the door take the most foot traffic. Post bases and rail tops collect standing water. JTH Painting & Subcontracting looks at these spots first, because they decide how long your whole stain job lasts. We clean out mildew completely so it doesn’t grow back under the new color, and we give high-traffic boards extra attention. Affordable deck staining in Franklin, Ohio means protecting these weak points early, before a few soft boards turn into a rebuilt staircase. Keeping sound wood sealed costs far less than replacing it.

Our Process

  1. Old Finish Test

We check what stain is on the wood now and how well it’s holding, which decides the prep.

 

  1. Strip, Scrub, or Wash

We remove flaking stains, treat mildew, and clean the whole surface down to sound wood.

 

  1. Dry Out and Smooth

Once the boards dry fully, we sand rough or splintered areas so the stain soaks in evenly.

 

  1. Stain and Final Check

Stain goes on the decking, rails, and stairs, then we walk the deck with you to confirm coverage.

What You Can Count On

Deck staining looks easy until it peels a few months later. These habits keep yours from failing early.

Test Before Staining

We identify the old finish so the new stain actually bonds.

Mildew Removed Fully

Green growth gets cleaned out, not stained over.

Weak Spots First

Stairs, post bases, and shaded boards get extra prep time.

Board Repairs Included

Our handyman skills let us swap soft boards before staining.

What People Think About Us

Frequently Asked Questions

Usually because it went over dirty wood, damp boards, or a loose older coating, stains need clean, dry, sound wood to bond, which is why our prep takes the most time.

Semi-transparent shows the grain and wears by fading. Solid hides worn boards but can peel on walking surfaces over time. We’ll recommend one based on your wood’s condition.

We clean it out fully and stain the wood, which makes it harder for mildew to take hold. Shaded, damp spots may still need a yearly wash to stay clean.

It depends on the stain and the weather. We’ll give you the drying time listed for your product. Light foot traffic usually comes back before furniture does.

Yes. We test the old finish, check for damage, and give you a fixed price at no cost. You’ll know what prep is included before you agree to anything.